tungsten chloride oxide (WCl2O2), (T-4)- Thermodynamic Properties vs Temperature (CAS 13520-76-8)

Analyze how thermophysical properties change over a temperature range at a constant pressure of 1 atm.

Input Conditions

Define the chemical and range for the property profile.

Loading...

Property Profile for tungsten chloride oxide (WCl2O2), (T-4)-

Calculated properties vs. Temperature

Profile Data

Equilibrium Thermodynamic and Transport Properties of tungsten chloride oxide (WCl2O2), (T-4)- at 1.01325 bar over -23.15–226.85 °C
Temperature (°C)Specific heat capacity (kJ/kg·K)Density (kg/m³)Dynamic viscosity (cP)Thermal conductivity (W/m·K)Prandtl number ()Molar volume (m³/kmol)Specific enthalpy (kJ)Specific entropy (kJ/kg·K)Phase
-23.150.3492374669.92N/A N/A N/A 0.0614026-17.1763-0.0627933s
-18.0480.3508244669.92N/A N/A N/A 0.0614026-15.3904-0.0557218s
-12.94590.3524114669.92N/A N/A N/A 0.0614026-13.5965-0.0487589s
-7.843880.3539984669.92N/A N/A N/A 0.0614026-11.7944-0.0419004s
-2.741840.3555844669.92N/A N/A N/A 0.0614026-9.98425-0.0351424s
2.36020.3571714669.92N/A N/A N/A 0.0614026-8.166-0.0284809s
7.462240.3587584669.92N/A N/A N/A 0.0614026-6.33964-0.0219126s
12.56430.3603454669.92N/A N/A N/A 0.0614026-4.5052-0.0154341s
17.66630.3619324669.92N/A N/A N/A 0.0614026-2.66265-0.00904214s
22.76840.3635194669.92N/A N/A N/A 0.0614026-0.812015-0.00273375s
27.87040.3651134669.92N/A N/A N/A 0.06140261.046730.00349394s
32.97240.3667434669.92N/A N/A N/A 0.06140262.913690.00964405s
38.07450.368414669.92N/A N/A N/A 0.06140264.789070.0157197s
43.17650.370114669.92N/A N/A N/A 0.06140266.673030.021724s
48.27860.371844669.92N/A N/A N/A 0.06140268.565750.0276597s
53.38060.3735974669.92N/A N/A N/A 0.061402610.46740.0335293s
58.48270.3753794669.92N/A N/A N/A 0.061402612.3780.0393354s
63.58470.3771844669.92N/A N/A N/A 0.061402614.29780.0450802s
68.68670.3790094669.92N/A N/A N/A 0.061402616.22690.0507659s
73.78880.3808524669.92N/A N/A N/A 0.061402618.16530.0563945s
78.89080.3827124669.92N/A N/A N/A 0.061402620.11310.0619681s
83.99290.3845864669.92N/A N/A N/A 0.061402622.07050.0674882s
89.09490.3864734669.92N/A N/A N/A 0.061402624.03750.0729568s
94.19690.3883724669.92N/A N/A N/A 0.061402626.01410.0783753s
99.2990.3902814669.92N/A N/A N/A 0.061402628.00050.0837454s
104.4010.3921984669.92N/A N/A N/A 0.061402629.99660.0890684s
109.5030.3941234669.92N/A N/A N/A 0.061402632.00250.0943458s
114.6050.3960544669.92N/A N/A N/A 0.061402634.01830.0995788s
119.7070.397994669.92N/A N/A N/A 0.061402636.04390.104769s
124.8090.3999314669.92N/A N/A N/A 0.061402638.07940.109917s
129.9110.4018744669.92N/A N/A N/A 0.061402640.12480.115024s
135.0130.403824669.92N/A N/A N/A 0.061402642.18020.120091s
140.1150.4057674669.92N/A N/A N/A 0.061402644.24550.125119s
145.2170.4077154669.92N/A N/A N/A 0.061402646.32070.13011s
150.3190.4096634669.92N/A N/A N/A 0.061402648.40580.135064s
155.4210.4116094669.92N/A N/A N/A 0.061402650.50090.139982s
160.5230.4135544669.92N/A N/A N/A 0.061402652.60590.144865s
165.6260.4154974669.92N/A N/A N/A 0.061402654.72080.149713s
170.7280.4174374669.92N/A N/A N/A 0.061402656.84570.154528s
175.830.4193734669.92N/A N/A N/A 0.061402658.98040.159309s
180.9320.4213064669.92N/A N/A N/A 0.061402661.1250.164059s
186.0340.4232344669.92N/A N/A N/A 0.061402663.27940.168777s
191.1360.4251564669.92N/A N/A N/A 0.061402665.44370.173464s
196.2380.4270744669.92N/A N/A N/A 0.061402667.61770.178121s
201.340.4289854669.92N/A N/A N/A 0.061402669.80160.182749s
206.4420.430894669.92N/A N/A N/A 0.061402671.99510.187347s
211.5440.4327884669.92N/A N/A N/A 0.061402674.19840.191917s
216.6460.4346794669.92N/A N/A N/A 0.061402676.41130.196459s
221.7480.4365634669.92N/A N/A N/A 0.061402678.63390.200973s
226.850.4384384669.92N/A N/A N/A 0.061402680.8660.20546s

Property Profiles for tungsten chloride oxide (WCl2O2), (T-4)-

Heat Capacity (Cp) vs Temperature

Download image

Density vs Temperature

Download image

Thermodynamic Property Profile at Constant Pressure

This page presents the temperature-dependent thermodynamic and transport properties of tungsten chloride oxide (WCl2O2), (T-4)- (CAS 13520-76-8) calculated at a constant pressure of 1 atm (101325 Pa) over the temperature range 250-500 K.

The properties shown - specific heat capacity (Cp), density (ρ), dynamic viscosity (μ), thermal conductivity (k), Prandtl number (Pr), molar volume (Vm), specific enthalpy (H), and specific entropy (S) - are among the most commonly used parameters in chemical engineering calculations, process simulation, and thermal system design.

All values are generated programmatically using validated thermodynamic correlations and equations of state and represent equilibrium properties at the specified pressure.


Understanding the Property Trends

  • Specific heat capacity (Cp) indicates the amount of energy required to raise the temperature of tungsten chloride oxide (WCl2O2), (T-4)- and is critical for energy balance and heat-exchanger design.
  • Density (ρ) and molar volume (Vm) describe volumetric behavior and are required for flow calculations, equipment sizing, and storage design.
  • Dynamic viscosity (μ) governs fluid flow resistance, influencing Reynolds number and pressure drop.
  • Thermal conductivity (k) and Prandtl number (Pr) are essential inputs for convective heat-transfer correlations.
  • Specific enthalpy (H) and specific entropy (S) are fundamental thermodynamic properties used in process modeling, compression, and expansion analysis.

Property trends with temperature may vary depending on molecular structure, intermolecular interactions, and phase stability.


Engineering Applications

The temperature-dependent properties of tungsten chloride oxide (WCl2O2), (T-4)- at atmospheric pressure are commonly required in:

  • Heat exchanger and reactor design
  • Process simulation and thermodynamic modeling
  • Fluid flow and pressure-drop calculations
  • Energy balance and equipment sizing
  • Chemical engineering education and research

These profiles are particularly useful when evaluating system performance over a wide operating temperature range under near-ambient pressure conditions.


Frequently Asked Questions

At what pressure are these properties calculated?
All properties on this page are calculated at a constant pressure of 1 atm (101325 Pa).

Can these values be used in process simulation software?
Yes. The data is suitable for preliminary design, validation, and educational use. For licensed simulators, vendor-specific property packages should be referenced.

Can I change the pressure or temperature range?
Yes. Use the interactive controls above to generate custom property profiles at different pressures or temperature ranges.


Explore Other Chemicals

sodium monoxide

CAS: 12401-86-4

ferrovanadium

CAS: 12604-58-9

potassium sulfide

CAS: 1312-73-8

sodium sulfide nonahydrate

CAS: 1313-84-4

strontium tungsten oxide (SrWO4)

CAS: 13451-05-3

tungsten chloride oxide (WCl4O)

CAS: 13520-78-0

sulfuric acid, europium(3+) salt (3:2)

CAS: 13537-15-0

titanium fluoride oxide (TiF2O)

CAS: 13537-16-1

niobium chloride oxide (NbCl3O), (T-4)-

CAS: 13597-20-1

vanadium, trifluorooxo-, (T-4)-

CAS: 13709-31-4

Browse A-Z Chemical Index