3-Aminocoumarin Thermodynamic Properties vs Temperature (CAS 1635-31-0)

Analyze how thermophysical properties change over a temperature range at a constant pressure of 1 atm.

Input Conditions

Define the chemical and range for the property profile.

Loading...

Property Profile for 3-Aminocoumarin

Calculated properties vs. Temperature

Profile Data

Equilibrium Thermodynamic and Transport Properties of 3-Aminocoumarin at 1.01325 bar over -23.15–226.85 °C
Temperature (°C)Specific heat capacity (kJ/kg·K)Density (kg/m³)Dynamic viscosity (cP)Thermal conductivity (W/m·K)Prandtl number ()Molar volume (m³/kmol)Specific enthalpy (kJ)Specific entropy (kJ/kg·K)Phase
-23.150.8939721257.32N/A N/A N/A 0.128176-47.0606-0.171717s
-18.0480.9114961255.16N/A N/A N/A 0.128396-42.4548-0.15348s
-12.94590.9290761253N/A N/A N/A 0.128617-37.7595-0.135257s
-7.843880.9467131250.85N/A N/A N/A 0.128838-32.9743-0.117046s
-2.741840.9644071248.69N/A N/A N/A 0.129061-28.0991-0.0988445s
2.36020.9821581246.54N/A N/A N/A 0.129284-23.1334-0.0806524s
7.462240.9999681244.38N/A N/A N/A 0.129508-18.0769-0.0624679s
12.56431.017841242.22N/A N/A N/A 0.129733-12.9295-0.0442895s
17.66631.035761240.07N/A N/A N/A 0.129959-7.69076-0.0261161s
22.76841.053751237.91N/A N/A N/A 0.130185-2.36038-0.00794651s
27.87041.07181235.76N/A N/A N/A 0.1304123.061910.0102205s
32.97241.08991233.6N/A N/A N/A 0.130648.576430.028386s
38.07451.108071231.44N/A N/A N/A 0.13086914.18350.046551s
43.17651.12631229.29N/A N/A N/A 0.13109819.88340.0647166s
48.27861.144591227.13N/A N/A N/A 0.13132925.67650.0828836s
53.38061.162941224.98N/A N/A N/A 0.1315631.5630.101053s
58.48271.181351222.82N/A N/A N/A 0.13179237.54330.119226s
63.58471.199821220.66N/A N/A N/A 0.13202443.61770.137402s
68.68671.218361218.51N/A N/A N/A 0.13225849.78640.155584s
73.78881.236951216.35N/A N/A N/A 0.13249356.050.173772s
78.89081.255611214.19N/A N/A N/A 0.13272862.40850.191965s
83.99291.274331212.04N/A N/A N/A 0.13296468.86240.210166s
89.09491.293111209.88N/A N/A N/A 0.13320175.4120.228375s
94.19691.311951207.73N/A N/A N/A 0.13343982.05750.246592s
99.2991.330861205.57N/A N/A N/A 0.13367788.79930.264818s
104.4011.349831203.41N/A N/A N/A 0.13391795.63780.283054s
109.5031.368861201.26N/A N/A N/A 0.134157102.5730.3013s
114.6051.387961199.1N/A N/A N/A 0.134398109.6060.319557s
119.7071.407111196.95N/A N/A N/A 0.134641116.7360.337826s
124.8091.426331194.79N/A N/A N/A 0.134884123.9640.356106s
129.9111.445621192.63N/A N/A N/A 0.135127131.2910.374399s
135.0131.746611060.99N/A 0.113215N/A 0.151893278.40.739165l
140.1151.758961057.07N/A 0.112484N/A 0.152456287.3430.76094l
145.2171.771011053.13N/A 0.111752N/A 0.153026296.3480.782596l
150.3191.782761049.17N/A 0.11102N/A 0.153604305.4140.804135l
155.4211.794221045.19N/A 0.110288N/A 0.15419314.5390.825554l
160.5231.805371041.17N/A 0.109556N/A 0.154784323.7220.846854l
165.6261.816221037.14N/A 0.108824N/A 0.155386332.9610.868033l
170.7281.826771033.08N/A 0.108092N/A 0.155997342.2540.889091l
175.831.837021028.99N/A 0.10736N/A 0.156617351.6010.910028l
180.9321.846981024.88N/A 0.106628N/A 0.157245360.9990.930842l
186.0341.856631020.74N/A 0.105896N/A 0.157883370.4470.951533l
191.1361.865981016.57N/A 0.105164N/A 0.15853379.9440.9721l
196.2381.875031012.38N/A 0.104432N/A 0.159187389.4870.992543l
201.341.883781008.15N/A 0.1037N/A 0.159854399.0761.01286l
206.4421.892231003.9N/A 0.102968N/A 0.160532408.7091.03305l
211.5441.90037999.614N/A 0.102236N/A 0.16122418.3841.05312l
216.6461.90822995.298N/A 0.101504N/A 0.161919428.11.07306l
221.7481.91577990.95N/A 0.100772N/A 0.162629437.8551.09288l
226.851.92302986.569N/A 0.10004N/A 0.163351447.6481.11256l

Property Profiles for 3-Aminocoumarin

Heat Capacity (Cp) vs Temperature

Download image

Density vs Temperature

Download image

Thermodynamic Property Profile at Constant Pressure

This page presents the temperature-dependent thermodynamic and transport properties of 3-Aminocoumarin (CAS 1635-31-0) calculated at a constant pressure of 1 atm (101325 Pa) over the temperature range 250-500 K.

The properties shown - specific heat capacity (Cp), density (ρ), dynamic viscosity (μ), thermal conductivity (k), Prandtl number (Pr), molar volume (Vm), specific enthalpy (H), and specific entropy (S) - are among the most commonly used parameters in chemical engineering calculations, process simulation, and thermal system design.

All values are generated programmatically using validated thermodynamic correlations and equations of state and represent equilibrium properties at the specified pressure.


Understanding the Property Trends

  • Specific heat capacity (Cp) indicates the amount of energy required to raise the temperature of 3-Aminocoumarin and is critical for energy balance and heat-exchanger design.
  • Density (ρ) and molar volume (Vm) describe volumetric behavior and are required for flow calculations, equipment sizing, and storage design.
  • Dynamic viscosity (μ) governs fluid flow resistance, influencing Reynolds number and pressure drop.
  • Thermal conductivity (k) and Prandtl number (Pr) are essential inputs for convective heat-transfer correlations.
  • Specific enthalpy (H) and specific entropy (S) are fundamental thermodynamic properties used in process modeling, compression, and expansion analysis.

Property trends with temperature may vary depending on molecular structure, intermolecular interactions, and phase stability.


Engineering Applications

The temperature-dependent properties of 3-Aminocoumarin at atmospheric pressure are commonly required in:

  • Heat exchanger and reactor design
  • Process simulation and thermodynamic modeling
  • Fluid flow and pressure-drop calculations
  • Energy balance and equipment sizing
  • Chemical engineering education and research

These profiles are particularly useful when evaluating system performance over a wide operating temperature range under near-ambient pressure conditions.


Frequently Asked Questions

At what pressure are these properties calculated?
All properties on this page are calculated at a constant pressure of 1 atm (101325 Pa).

Can these values be used in process simulation software?
Yes. The data is suitable for preliminary design, validation, and educational use. For licensed simulators, vendor-specific property packages should be referenced.

Can I change the pressure or temperature range?
Yes. Use the interactive controls above to generate custom property profiles at different pressures or temperature ranges.


Explore Other Chemicals

tetraethylene glycol monobutyl ether

CAS: 1559-34-8

2-Pyrazinecarboxylic acid, 3-amino-5,6-dichloro-, methyl ester

CAS: 1458-18-0

4-(Chloroacetyl)morpholine

CAS: 1440-61-5

propanedioic acid, 2,2-bis(2-cyanoethyl)-, 1,3-diethyl ester

CAS: 1444-05-9

[1,1′-Biphenyl]-4-sulfonyl chloride

CAS: 1623-93-4

dipropylmalonic acid

CAS: 1636-27-7

1,1′-Oxybis[1,1-difluoromethane]

CAS: 1691-17-4

3-Iodobenzoyl chloride

CAS: 1711-10-0

nicotinanilide

CAS: 1752-96-1

2-(2-Methoxyphenyl)-5-phenyl-1,3,4-oxadiazole

CAS: 1874-42-6

Browse A-Z Chemical Index