2-Chloronicotinic acid Thermodynamic Properties vs Temperature (CAS 2942-59-8)

Analyze how thermophysical properties change over a temperature range at a constant pressure of 1 atm.

Input Conditions

Define the chemical and range for the property profile.

Loading...

Property Profile for 2-Chloronicotinic acid

Calculated properties vs. Temperature

Profile Data

Equilibrium Thermodynamic and Transport Properties of 2-Chloronicotinic acid at 1.01325 bar over -23.15–226.85 °C
Temperature (°C)Specific heat capacity (kJ/kg·K)Density (kg/m³)Dynamic viscosity (cP)Thermal conductivity (W/m·K)Prandtl number ()Molar volume (m³/kmol)Specific enthalpy (kJ)Specific entropy (kJ/kg·K)Phase
-23.150.694141390.33N/A N/A N/A 0.113322-36.7162-0.133954s
-18.0480.7084751388.28N/A N/A N/A 0.113489-33.1381-0.119787s
-12.94590.722871386.22N/A N/A N/A 0.113657-29.4867-0.105615s
-7.843880.7373251384.17N/A N/A N/A 0.113826-25.7618-0.0914385s
-2.741840.7518411382.12N/A N/A N/A 0.113994-21.9629-0.0772561s
2.36020.7664171380.07N/A N/A N/A 0.114164-18.0898-0.0630669s
7.462240.7810551378.02N/A N/A N/A 0.114334-14.1422-0.04887s
12.56430.7957541375.97N/A N/A N/A 0.114504-10.1198-0.0346646s
17.66630.8105161373.92N/A N/A N/A 0.114675-6.02218-0.0204499s
22.76840.8253391371.87N/A N/A N/A 0.114846-1.84911-0.00622523s
27.87040.8402241369.82N/A N/A N/A 0.1150182.399750.00801024s
32.97240.8551711367.77N/A N/A N/A 0.1151916.724710.0222572s
38.07450.8701811365.72N/A N/A N/A 0.11536411.12610.0365162s
43.17650.8852541363.67N/A N/A N/A 0.11553715.60420.0507879s
48.27860.9003891361.62N/A N/A N/A 0.11571120.15940.0650729s
53.38060.9155881359.57N/A N/A N/A 0.11588624.7920.0793719s
58.48270.9308491357.52N/A N/A N/A 0.11606129.50220.0936852s
63.58470.9461741355.47N/A N/A N/A 0.11623634.29050.108014s
68.68670.9615621353.42N/A N/A N/A 0.11641339.15720.122357s
73.78880.9770141351.36N/A N/A N/A 0.11658944.10250.136717s
78.89080.9925291349.31N/A N/A N/A 0.11676649.12680.151093s
83.99291.008111347.26N/A N/A N/A 0.11694454.23050.165486s
89.09491.023751345.21N/A N/A N/A 0.11712259.41380.179896s
94.19691.039461343.16N/A N/A N/A 0.11730164.6770.194324s
99.2991.055231341.11N/A N/A N/A 0.11748170.02060.20877s
104.4011.071061339.06N/A N/A N/A 0.1176675.44470.223235s
109.5031.086961337.01N/A N/A N/A 0.11784180.94980.237718s
114.6051.102921334.96N/A N/A N/A 0.11802286.53620.25222s
119.7071.118951332.91N/A N/A N/A 0.11820392.20420.266742s
124.8091.135041330.86N/A N/A N/A 0.11838697.95420.281284s
129.9111.151191328.81N/A N/A N/A 0.118568103.7860.295846s
135.0131.167411326.76N/A N/A N/A 0.118752109.7010.310428s
140.1151.183691324.71N/A N/A N/A 0.118935115.6990.325031s
145.2171.200041322.66N/A N/A N/A 0.11912121.780.339655s
150.3191.216451320.61N/A N/A N/A 0.119305127.9440.354301s
155.4211.232931318.55N/A N/A N/A 0.11949134.1930.368967s
160.5231.249471316.5N/A N/A N/A 0.119676140.5250.383656s
165.6261.266071314.45N/A N/A N/A 0.119863146.9420.398367s
170.7281.282741312.4N/A N/A N/A 0.12005153.4440.4131s
175.831.299471310.35N/A N/A N/A 0.120238160.0320.427855s
180.9321.316271308.3N/A N/A N/A 0.120427166.7040.442633s
186.0341.333131306.25N/A N/A N/A 0.120616173.4630.457434s
191.1361.494551164.15N/A 0.111207N/A 0.135339335.4320.80683l
196.2381.501331159.74N/A 0.110492N/A 0.135853343.0750.823202l
201.341.507831155.31N/A 0.109777N/A 0.136374350.7510.839468l
206.4421.514041150.86N/A 0.109062N/A 0.136902358.460.855628l
211.5441.519981146.37N/A 0.108347N/A 0.137437366.20.871681l
216.6461.525631141.86N/A 0.107632N/A 0.13798373.970.887627l
221.7481.530991137.32N/A 0.106916N/A 0.138531381.7680.903465l
226.851.536081132.75N/A 0.106201N/A 0.13909389.5920.919194l

Property Profiles for 2-Chloronicotinic acid

Heat Capacity (Cp) vs Temperature

Download image

Density vs Temperature

Download image

Thermodynamic Property Profile at Constant Pressure

This page presents the temperature-dependent thermodynamic and transport properties of 2-Chloronicotinic acid (CAS 2942-59-8) calculated at a constant pressure of 1 atm (101325 Pa) over the temperature range 250-500 K.

The properties shown - specific heat capacity (Cp), density (ρ), dynamic viscosity (μ), thermal conductivity (k), Prandtl number (Pr), molar volume (Vm), specific enthalpy (H), and specific entropy (S) - are among the most commonly used parameters in chemical engineering calculations, process simulation, and thermal system design.

All values are generated programmatically using validated thermodynamic correlations and equations of state and represent equilibrium properties at the specified pressure.


Understanding the Property Trends

  • Specific heat capacity (Cp) indicates the amount of energy required to raise the temperature of 2-Chloronicotinic acid and is critical for energy balance and heat-exchanger design.
  • Density (ρ) and molar volume (Vm) describe volumetric behavior and are required for flow calculations, equipment sizing, and storage design.
  • Dynamic viscosity (μ) governs fluid flow resistance, influencing Reynolds number and pressure drop.
  • Thermal conductivity (k) and Prandtl number (Pr) are essential inputs for convective heat-transfer correlations.
  • Specific enthalpy (H) and specific entropy (S) are fundamental thermodynamic properties used in process modeling, compression, and expansion analysis.

Property trends with temperature may vary depending on molecular structure, intermolecular interactions, and phase stability.


Engineering Applications

The temperature-dependent properties of 2-Chloronicotinic acid at atmospheric pressure are commonly required in:

  • Heat exchanger and reactor design
  • Process simulation and thermodynamic modeling
  • Fluid flow and pressure-drop calculations
  • Energy balance and equipment sizing
  • Chemical engineering education and research

These profiles are particularly useful when evaluating system performance over a wide operating temperature range under near-ambient pressure conditions.


Frequently Asked Questions

At what pressure are these properties calculated?
All properties on this page are calculated at a constant pressure of 1 atm (101325 Pa).

Can these values be used in process simulation software?
Yes. The data is suitable for preliminary design, validation, and educational use. For licensed simulators, vendor-specific property packages should be referenced.

Can I change the pressure or temperature range?
Yes. Use the interactive controls above to generate custom property profiles at different pressures or temperature ranges.


Explore Other Chemicals

2,3,5,6-Tetrabromo-1,4-benzenediol

CAS: 2641-89-6

2-Aminoethyl ether

CAS: 2752-17-2

2,6-Dimethylphenyl isocyanide

CAS: 2769-71-3

2-Chloro-N-(1-methylethyl)acetamide

CAS: 2895-21-8

2-(2,3-Dimethylphenoxy)acetic acid

CAS: 2935-63-9

4-(Hydroxymethyl)benzoic acid

CAS: 3006-96-0

acetyl-β-alanine

CAS: 3025-95-4

1,4-Naphthalenedicarbonitrile

CAS: 3029-30-9

1-Acetyl-5-bromo-4-chloro-1H-indol-3-yl acetate

CAS: 3030-06-6

imidazole-4-carboxaldehyde

CAS: 3034-50-2

Browse A-Z Chemical Index