1-buten-3-yne Thermodynamic Properties vs Temperature (CAS 689-97-4)

Analyze how thermophysical properties change over a temperature range at a constant pressure of 1 atm.

Input Conditions

Define the chemical and range for the property profile.

Loading...

Property Profile for 1-buten-3-yne

Calculated properties vs. Temperature

Profile Data

Equilibrium Thermodynamic and Transport Properties of 1-buten-3-yne at 1.01325 bar over -23.15–226.85 °C
Temperature (°C)Specific heat capacity (kJ/kg·K)Density (kg/m³)Dynamic viscosity (cP)Thermal conductivity (W/m·K)Prandtl number ()Molar volume (m³/kmol)Specific enthalpy (kJ)Specific entropy (kJ/kg·K)Phase
-23.151.12158303.811N/A N/A N/A 0.171405-58.6697-0.214115s
-18.0481.14202303.375N/A N/A N/A 0.171651-52.8952-0.191251s
-12.94591.16249302.94N/A N/A N/A 0.171898-47.0164-0.168434s
-7.843881.183302.504N/A N/A N/A 0.172145-41.033-0.145662s
-2.741841.20354302.069N/A N/A N/A 0.172393-34.9449-0.122933s
2.36021.22413301.633N/A N/A N/A 0.172642-28.7519-0.100245s
7.462241.24475301.198N/A N/A N/A 0.172892-22.4538-0.0775943s
12.56431.26541300.762N/A N/A N/A 0.173142-16.0503-0.0549802s
17.66631.28612300.326N/A N/A N/A 0.173393-9.5413-0.0324003s
22.76841.30686299.891N/A N/A N/A 0.173645-2.92657-0.00985265s
27.87041.32765299.455N/A N/A N/A 0.1738983.79410.0126645s
32.97241.34848299.02N/A N/A N/A 0.17415110.62090.0351529s
38.07451.36935298.584N/A N/A N/A 0.17440517.55410.0576142s
43.17651.39026298.149N/A N/A N/A 0.1746624.59390.08005s
48.27861.41121297.713N/A N/A N/A 0.17491531.74050.102462s
53.38061.43221297.278N/A N/A N/A 0.17517138.99410.124851s
58.48271.45326296.842N/A N/A N/A 0.17542846.3550.147219s
63.58471.47434296.407N/A N/A N/A 0.17568653.82330.169567s
68.68671.49548295.971N/A N/A N/A 0.17594561.39940.191896s
73.78881.51665295.536N/A N/A N/A 0.17620469.08340.214208s
78.89081.53787295.1N/A N/A N/A 0.17646476.87550.236504s
83.99291.55914294.665N/A N/A N/A 0.17672584.7760.258785s
89.09491.58045294.229N/A N/A N/A 0.17698692.78520.281051s
94.19691.60181293.794N/A N/A N/A 0.177249100.9030.303305s
99.2991.62321293.358N/A N/A N/A 0.177512109.130.325546s
104.4011.64466292.923N/A N/A N/A 0.177776117.4670.347777s
109.5031.66615292.487N/A N/A N/A 0.17804125.9130.369997s
114.6051.68769292.052N/A N/A N/A 0.178306134.4680.392208s
119.7071.70928291.616N/A N/A N/A 0.178572143.1340.41441s
124.8091.73091291.181N/A N/A N/A 0.178839151.910.436605s
129.9111.75259290.745N/A N/A N/A 0.179107160.7960.458793s
135.0131.77432290.31N/A N/A N/A 0.179376169.7940.480974s
140.1151.79609289.874N/A N/A N/A 0.179645178.9020.503151s
145.2171.81791289.439N/A N/A N/A 0.179916188.1210.525323s
150.3191.83978289.003N/A N/A N/A 0.180187197.4520.54749s
155.4211.86169288.568N/A N/A N/A 0.180459206.8940.569655s
160.5231.88365288.132N/A N/A N/A 0.180731216.4490.591817s
165.6261.90566287.697N/A N/A N/A 0.181005226.1150.613976s
170.7281.92772287.261N/A N/A N/A 0.181279235.8940.636134s
175.831.94982286.826N/A N/A N/A 0.181555245.7860.658292s
180.9321.97197286.39N/A N/A N/A 0.181831255.7910.680449s
186.0341.99417285.955N/A N/A N/A 0.182108265.9080.702606s
191.1362.01641285.519N/A N/A N/A 0.182385276.1390.724764s
196.2382.0387285.084N/A N/A N/A 0.182664286.4840.746923s
201.342.06104284.648N/A N/A N/A 0.182944296.9430.769083s
206.4421.903161.323230.01204740.0340130.674139.354855.1792.59341g
211.5441.914561.30930.01215670.03457210.67322439.7727864.9182.61361g
216.6461.925841.295670.01226560.03513330.67233940.1914874.7152.63371g
221.7481.9371.282310.0123740.03569660.67144640.61884.5692.65373g
226.851.948041.269220.01248190.03626190.67054541.0287894.482.67365g

Property Profiles for 1-buten-3-yne

Heat Capacity (Cp) vs Temperature

Download image

Density vs Temperature

Download image

Thermodynamic Property Profile at Constant Pressure

This page presents the temperature-dependent thermodynamic and transport properties of 1-buten-3-yne (CAS 689-97-4) calculated at a constant pressure of 1 atm (101325 Pa) over the temperature range 250-500 K.

The properties shown - specific heat capacity (Cp), density (ρ), dynamic viscosity (μ), thermal conductivity (k), Prandtl number (Pr), molar volume (Vm), specific enthalpy (H), and specific entropy (S) - are among the most commonly used parameters in chemical engineering calculations, process simulation, and thermal system design.

All values are generated programmatically using validated thermodynamic correlations and equations of state and represent equilibrium properties at the specified pressure.


Understanding the Property Trends

  • Specific heat capacity (Cp) indicates the amount of energy required to raise the temperature of 1-buten-3-yne and is critical for energy balance and heat-exchanger design.
  • Density (ρ) and molar volume (Vm) describe volumetric behavior and are required for flow calculations, equipment sizing, and storage design.
  • Dynamic viscosity (μ) governs fluid flow resistance, influencing Reynolds number and pressure drop.
  • Thermal conductivity (k) and Prandtl number (Pr) are essential inputs for convective heat-transfer correlations.
  • Specific enthalpy (H) and specific entropy (S) are fundamental thermodynamic properties used in process modeling, compression, and expansion analysis.

Property trends with temperature may vary depending on molecular structure, intermolecular interactions, and phase stability.


Engineering Applications

The temperature-dependent properties of 1-buten-3-yne at atmospheric pressure are commonly required in:

  • Heat exchanger and reactor design
  • Process simulation and thermodynamic modeling
  • Fluid flow and pressure-drop calculations
  • Energy balance and equipment sizing
  • Chemical engineering education and research

These profiles are particularly useful when evaluating system performance over a wide operating temperature range under near-ambient pressure conditions.


Frequently Asked Questions

At what pressure are these properties calculated?
All properties on this page are calculated at a constant pressure of 1 atm (101325 Pa).

Can these values be used in process simulation software?
Yes. The data is suitable for preliminary design, validation, and educational use. For licensed simulators, vendor-specific property packages should be referenced.

Can I change the pressure or temperature range?
Yes. Use the interactive controls above to generate custom property profiles at different pressures or temperature ranges.


Explore Other Chemicals

hexamethylphosphoramide

CAS: 680-31-9

tetramethoxysilane

CAS: 681-84-5

hexafluoroacetone

CAS: 684-16-2

tributyl borate

CAS: 688-74-4

isopropyl acrylate

CAS: 689-12-3

1,1,1,3,3,3-hexafluoropropane

CAS: 690-39-1

4-methyl-1-pentene

CAS: 691-37-2

1-hexyne

CAS: 693-02-7

dodecanedioic acid

CAS: 693-23-2

pentyl ether

CAS: 693-65-2

Browse A-Z Chemical Index