Properties of trans-4-Methyl-2-pentene
Thermophysical properties for trans-4-Methyl-2-pentene (CAS: 674-76-0). Use the selector below to view properties in different unit systems.
Calculation Conditions
The following state-dependent properties were calculated at these standard conditions.
Temperature
25 °C
Pressure
1.01325 bar
Need properties at a different state? Use our interactive calculator.
Open CalculatorIdentification
- AtomsC: 6, H: 12
- CAS674-76-0
- FormulaC6H12
- ID674-76-0
- InChIC6H12/c1-4-5-6(2)3/h4-6H,1-3H3/b5-4+
- InChI KeyLGAQJENWWYGFSN-SNAWJCMRSA-N
- IUPAC Name(e)-4-methylpent-2-ene
- Molecular Weight (kg)84.1595
- Phasel
- PubChem ID1.7209e+5
- SMILESC/C=C/C(C)C
- Synonyms
Physical Properties
- Acentric factor0.255
- Critical pressure (bar)32.2
- Critical temperature (°C)227.85
- Critical volume (m³/kmol)0.346
- Dipole moment
- Melting temperature (°C)-140.8
- Normal boiling temperature (°C)58.58
State-dependent Properties
- API gravity76.8592
- Compressibility factor0.00513569
- Density (kg/m³)669.811
- Dynamic viscosity (cP)0.242015
- Enthalpy of vaporization (mass) (kJ)343.234
- Enthalpy of vaporization (molar) (kJ/kmol)2.8886e+4
- Gibbs free energy (kJ/kmol)0
- Joule–Thomson coefficient-4.2044e-7
- Kinematic viscosity3.6132e-7
- Molar enthalpy (kJ/kmol)0
- Molar entropy (kJ/(kmol·K))0
- Molar heat capacity (kJ/(kmol·K))175.479
- Molar volume (m³/kmol)0.125647
- Parachor4.6038e-5
- Poynting correction factor1.00364
- Prandtl number4.36474
- Saturation pressure (bar)0.296875
- Saturation temperature (°C)58.6114
- Solubility parameter1.4497e+4
- Specific enthalpy (kJ)0
- Specific entropy (kJ/kg·K)0
- Specific gravity0.67047
- Specific heat capacity (kJ/kg·K)2.08507
- Surface tension0.0176575
- Thermal conductivity0.115613
- Thermal diffusivity8.2781e-8
Safety Properties
- Autoignition temperature (°C)-273.15
- Flash point temperature (°C)-273.15
- Lower flammability limit0.012454
- Upper flammability limit0.0740002
Environmental Properties
- Global warming potential
- Ozone depletion potential