5-Fluoropyridine-2-carboxylic acid Thermodynamic Properties vs Temperature (CAS 107504-08-5)

Analyze how thermophysical properties change over a temperature range at a constant pressure of 1 atm.

Input Conditions

Define the chemical and range for the property profile.

Loading...

Property Profile for 5-Fluoropyridine-2-carboxylic acid

Calculated properties vs. Temperature

Profile Data

Equilibrium Thermodynamic and Transport Properties of 5-Fluoropyridine-2-carboxylic acid at 1.01325 bar over -23.15–226.85 °C
Temperature (°C)Specific heat capacity (kJ/kg·K)Density (kg/m³)Dynamic viscosity (cP)Thermal conductivity (W/m·K)Prandtl number ()Molar volume (m³/kmol)Specific enthalpy (kJ)Specific entropy (kJ/kg·K)Phase
-23.150.7669761379.53N/A N/A N/A 0.102281-40.501-0.14777s
-18.0480.7825331377.33N/A N/A N/A 0.102445-36.5482-0.132118s
-12.94590.798151375.12N/A N/A N/A 0.102609-32.5159-0.116468s
-7.843880.8138281372.92N/A N/A N/A 0.102774-28.4037-0.100818s
-2.741840.8295661370.71N/A N/A N/A 0.102939-24.2114-0.0851666s
2.36020.8453661368.5N/A N/A N/A 0.103105-19.9387-0.0695131s
7.462240.8612271366.3N/A N/A N/A 0.103272-15.5851-0.0538564s
12.56430.8771491364.09N/A N/A N/A 0.103439-11.1505-0.0381955s
17.66630.8931341361.89N/A N/A N/A 0.103606-6.63453-0.0225294s
22.76840.9091811359.68N/A N/A N/A 0.103774-2.03681-0.00685715s
27.87040.9252911357.48N/A N/A N/A 0.1039432.642940.00882199s
32.97240.9414631355.27N/A N/A N/A 0.1041127.405040.0245089s
38.07450.9576991353.06N/A N/A N/A 0.10428212.24980.0402043s
43.17650.9739971350.86N/A N/A N/A 0.10445217.17760.0559091s
48.27860.9903591348.65N/A N/A N/A 0.10462322.18870.0716238s
53.38061.006781346.45N/A N/A N/A 0.10479427.28340.0873493s
58.48271.023271344.24N/A N/A N/A 0.10496632.46210.103086s
63.58471.039831342.04N/A N/A N/A 0.10513937.72510.118835s
68.68671.056441339.83N/A N/A N/A 0.10531243.07270.134596s
73.78881.073131337.63N/A N/A N/A 0.10548548.50520.150371s
78.89081.089871335.42N/A N/A N/A 0.1056654.0230.166159s
83.99291.106681333.21N/A N/A N/A 0.10583459.62650.181961s
89.09491.123551331.01N/A N/A N/A 0.1060165.31580.197779s
94.19691.140491328.8N/A N/A N/A 0.10618671.09140.213611s
99.2991.15751326.6N/A N/A N/A 0.10636276.95360.229459s
104.4011.174561324.39N/A N/A N/A 0.10653982.90270.245323s
109.5031.19171322.19N/A N/A N/A 0.10671788.93910.261204s
114.6051.20891319.98N/A N/A N/A 0.10689595.0630.277102s
119.7071.226161317.78N/A N/A N/A 0.107074101.2750.293017s
124.8091.243481315.57N/A N/A N/A 0.107254107.5750.30895s
129.9111.260881313.36N/A N/A N/A 0.107434113.9640.324902s
135.0131.278331311.16N/A N/A N/A 0.107615120.4410.340871s
140.1151.295861308.95N/A N/A N/A 0.107796127.0080.35686s
145.2171.313441306.75N/A N/A N/A 0.107978133.6640.372868s
150.3191.33111304.54N/A N/A N/A 0.10816140.4110.388896s
155.4211.348821302.34N/A N/A N/A 0.108344147.2470.404943s
160.5231.582021158.98N/A 0.1164N/A 0.121745320.1380.806832l
165.6261.591371154.3N/A 0.115649N/A 0.122238328.2340.82539l
170.7281.600421149.59N/A 0.114898N/A 0.122739336.3760.84384l
175.831.609181144.85N/A 0.114147N/A 0.123247344.5640.862181l
180.9321.617651140.08N/A 0.113396N/A 0.123763352.7960.880412l
186.0341.625821135.27N/A 0.112645N/A 0.124287361.070.898532l
191.1361.63371130.44N/A 0.111893N/A 0.124819369.3850.916541l
196.2381.641291125.56N/A 0.111142N/A 0.125359377.740.934438l
201.341.648591120.65N/A 0.110391N/A 0.125908386.1330.952221l
206.4421.655591115.71N/A 0.10964N/A 0.126466394.5620.969891l
211.5441.662291110.73N/A 0.108889N/A 0.127034403.0260.987446l
216.6461.668711105.71N/A 0.108138N/A 0.12761411.5241.00489l
221.7481.674831100.65N/A 0.107386N/A 0.128197420.0531.02221l
226.851.680661095.55N/A 0.106635N/A 0.128794428.6131.03942l

Property Profiles for 5-Fluoropyridine-2-carboxylic acid

Heat Capacity (Cp) vs Temperature

Download image

Density vs Temperature

Download image

Thermodynamic Property Profile at Constant Pressure

This page presents the temperature-dependent thermodynamic and transport properties of 5-Fluoropyridine-2-carboxylic acid (CAS 107504-08-5) calculated at a constant pressure of 1 atm (101325 Pa) over the temperature range 250-500 K.

The properties shown - specific heat capacity (Cp), density (ρ), dynamic viscosity (μ), thermal conductivity (k), Prandtl number (Pr), molar volume (Vm), specific enthalpy (H), and specific entropy (S) - are among the most commonly used parameters in chemical engineering calculations, process simulation, and thermal system design.

All values are generated programmatically using validated thermodynamic correlations and equations of state and represent equilibrium properties at the specified pressure.


Understanding the Property Trends

  • Specific heat capacity (Cp) indicates the amount of energy required to raise the temperature of 5-Fluoropyridine-2-carboxylic acid and is critical for energy balance and heat-exchanger design.
  • Density (ρ) and molar volume (Vm) describe volumetric behavior and are required for flow calculations, equipment sizing, and storage design.
  • Dynamic viscosity (μ) governs fluid flow resistance, influencing Reynolds number and pressure drop.
  • Thermal conductivity (k) and Prandtl number (Pr) are essential inputs for convective heat-transfer correlations.
  • Specific enthalpy (H) and specific entropy (S) are fundamental thermodynamic properties used in process modeling, compression, and expansion analysis.

Property trends with temperature may vary depending on molecular structure, intermolecular interactions, and phase stability.


Engineering Applications

The temperature-dependent properties of 5-Fluoropyridine-2-carboxylic acid at atmospheric pressure are commonly required in:

  • Heat exchanger and reactor design
  • Process simulation and thermodynamic modeling
  • Fluid flow and pressure-drop calculations
  • Energy balance and equipment sizing
  • Chemical engineering education and research

These profiles are particularly useful when evaluating system performance over a wide operating temperature range under near-ambient pressure conditions.


Frequently Asked Questions

At what pressure are these properties calculated?
All properties on this page are calculated at a constant pressure of 1 atm (101325 Pa).

Can these values be used in process simulation software?
Yes. The data is suitable for preliminary design, validation, and educational use. For licensed simulators, vendor-specific property packages should be referenced.

Can I change the pressure or temperature range?
Yes. Use the interactive controls above to generate custom property profiles at different pressures or temperature ranges.


Explore Other Chemicals

pentanoic acid, 4-methyl-3-oxo-, methyl ester

CAS: 42558-54-3

1-Methyl-3-phenylpiperazine

CAS: 5271-27-2

cyclopropylboronic acid

CAS: 411235-57-9

2-Chloro-L-phenylalanine

CAS: 103616-89-3

2-Fluoro-3-pyridinol

CAS: 174669-74-0

2-Bromo-4-pyridinecarboxaldehyde

CAS: 118289-17-1

2-Fluoro-5-(trifluoromethyl)phenylboronic acid

CAS: 352535-96-7

4-Methyl-2-(pyridin-3-yl)thiazole-5-carboxylic acid

CAS: 39091-01-5

ethyl 2-phenyl-4-(2-propen-1-ylamino)-5-pyrimidinecarboxylate

CAS: 76360-64-0

4-Bromo-2-chloro-6-methylbenzenamine

CAS: 30273-42-8

Browse A-Z Chemical Index